중고 PEM CWTMini 6B CWTMini6/B/2.5/200/2 CWT 로고스키 AC 전류프로브 플렉서블 타입

HOME

중고 PEM CWTMini 6B CWTMini6/B/2.5/200/2 CWT 로고스키 AC 전류프로브 플렉서블 타입

판매가: 770,000원

배송비

0원 / 주문시결제(선결제) 조건별배송

택배

방문 수령지 : 인천광역시 서구 보듬로 158 (블루텍) 공존동 624호

모델명: CWTMini6/B/2.5/200/2

브랜드: PEM

납기: 1주

중고 PEM CWTMini 6B CWTMini6/B/2.5/200/2 CWT 로고스키 AC 전류프로브 플렉서블 타입

0원

총 상품금액

총 할인금액

총 합계금액

상세정보
교환및반품
상품후기 (0)
상품문의 (0)

제품코드 읽는 법

해당 중고 제품인 경우, 배터리 장착형, 2.5미터 케이블길이, 200mm 코일길이, 2KV절연특성의 제품임.

CWT Range of AC Current Probes

The CWT Rogowski current probe is suitable for measuring AC currents ranging from a few 100 milliamps to hundreds of kA from below 1Hz to >10MHz.

CWT Mini & MiniHF

The CWT Mini & MiniHF are state-of-the art wide-bandwidth ac current probes with typical bandwidths in the range < 1Hz to 30MHz.

Two Miniature Coil Sizes (3.5mm or 4.5mm)
Insulation Voltage 2kV or 5kV peak
Current Ratings 30A to 120kA
Screened Coil Versions Available
'HF' range optimised high frequency & voltage immunity

Overview

The CWT Mini and MiniHF are state-of-the art, clip-around, AC Rogowski current probes with a small form factor and virtually zero insertion impedance.
The New CWT MiniHF combines an innovative screened Rogowski coil providing excellent immunity to interference from fast local dV/dt transients or large 50/60Hz voltages and an extended 30MHz (-3dB) high frequency bandwidth for 100mm coils. The coil has a wide operating temperature from -40°C to +125°C and is available with 5kV peak insulation, 4.5mm thickness.
The CWT Mini features both improved high frequency and low frequency performance. The CWT Mini is available with a coil thickness of 3.5mm (2kV peak) or 4.5mm max (5kV peak).
The CWT range is ideal for power electronic applications, such as monitoring semiconductor switching waveforms or for measurements in electrically noisy environments. The easy-to-use thin, flexible, clip-around coil accurately replicates fast switching current waveforms be they sinusoidal, quasi sinusoidal or pulsed.

Standards and Approvals

CE marked
Designed and Tested to EN 61326-1:2013
Designed and Tested to EN 61010-1 Third Edition
PEM Ltd is an ISO9001:2008 registered company
Patents Pending

Performance

Peak current	30A peak to 120kA peak
Output	±6.0V peak corresponding to 'Peak Current' into ≥100kΩ ±3.0V peak corresponding to 'Peak Current' into 50Ω
High Frequency Bandwidth (-3dB)	30MHz (100mm coil), 23MHz (200mm coil); CWT MiniHF 20MHz (100mm coil); 15MHz (200mm coil); CWT Mini
Low Frequency Bandwidth (-3dB)	Varies with model type (refer to datasheet)
Accuracy (typ.)	Calibrated to ±0.2% with conductor central in the Rogowski loop Typical variation with conductor position ±2.0% of reading
Operating temperature range	0℃ to +40℃ (Integrator electronics) –40℃ to +125℃ (CWT MiniHF -Coil and cable) –20℃ to +100℃ (CWT Mini -Coil and cable)
Coil Lengths	100 or 200mm (custom lengths available)
Coil thickness	2kV peak (3.5mm thickness) *CWT Mini Only 5kV peak (4.5mm thickness)
Cable Length (coil to integrator)	1m, 2.5m or 4m (custom lengths available)
Power Supply	Option ‘B’ Battery 4 x AA (1.5V standard alkali batteries) Plus - 2.1mm socket for 12V (±10%) DC input Option ‘R’ Rechargeable Battery 4 x AA (1.2V NiMH batteries) with on-board trickle charge circuitry. Plus - 2.1mm socket for 12V (±10%) DC input

Features

Traceable calibration (certificate included)
Thin, clip-around, Rogowski coil for easy insertion into circuits with restricted access
Maximum coil thickness 3.5mm (2kV) or 4.5mm (5kV)
Non-intrusive: Loads the circuit under test by only a few pH’s
No magnetic materials ensures excellent linearity < 0.05% reading
Galvanically isolated measurement

Applications

The CWT has been supplied to major electrical engineering companies and leading research institutions around the world for the past 20 years. This versatile instrument has been used for a wide variety of applications, some examples include:

Semiconductor Switching Waveforms

The CWT can be used for a wide variety of electronic measurements such as switching loss in power semiconductors or checking in-circuit inductance is not over stressing an IGBT or MOSFET.

The CWT is non-intrusive injecting only a few pH into the primary circuit, wide-bandwidth greater than 10MHz, has a predictable known measurement delay, and is thin and clip-around making it easy to insert into even difficult to reach parts of the circuit.
The new CWT MiniHF features an innovative screened coil making it the perfect choice for measurements on SiC devices which have faster rise times and larger blocking voltages.

Large AC Currents in Generators, Motor Drives and Power Supplies

Unlike other forms of current measurement the size of the sense coil (the Rogowski coil) is independent of the size of the measured current. Thus for large currents the size of the Rogowski coil can be chosen to suit the conductor diameter and transducer does not require an expensive and bulky magnetic former. Over a 1000A range there really is no better alternative to the Rogowski coil.

Pulsed Power Applications

PEM’s CWT Rogowski coils have been used:

to monitor current in the kicker magnets in a large particle accelerator.
in laser power supplies
in a ‘Superconducting Fault Current Limiter’ (Cryogenic Application)

Measuring Small AC Currents in the Presence of Large DC Currents (e.g. capacitor ripple)

Rogowski current transducers do not measure the DC component of a current. However unlike a CT or hall effect device they contain no magnetic materials so are unaffected by the DC current. Therefore it is possible to use a small, flexible, Rogowski coil to measure a small AC current in the presence of a large DC current whereas a sensor based on a magnetic principle would be expensive and bulky to prevent saturation effects. One such common application is measuring the ripple current in capacitors where the main current is DC or slow time varying.